SeaDoo GTI LE RFI Spezifikationen PDF herunterladen (Seite 75)

MAINTENANCE



WARNING

Only perform procedures as de-

tailed in this guide. It is recom-

mended that the assistance of an

authorized Sea-Doo dealer be peri-

odically obtained on other compo-

nents/systems not covered in this

guide. Unless otherwise speci-

fied, engine must not be running

and the safety lanyard must be re-

moved from its post for all main-

tenance procedures. Components

inside engine compartment may

be hot. Never use jet pump com-

ponents or side vanes to lift the

watercraft.

Lubrication

Use Sea-Doo synthetic grease or

equivalent and lubricate PTO flywheel.

Proceed as follows:

Remove seat to expose engine com-

partment.

Remove vent tube support.

PTO Flywheel

Remove the fasteners and pull out

PTO flywheel guard.

F06I04Y

2

1

TYPICAL

1. Flywheel guard

2. Wing nuts

Using a grease gun, carefully lubricate

PTO flywheel at grease fitting until

PTO flywheel boot begins to expand.

CAUTION:

Immediately stop lubri-

cating as soon as PTO flywheel boot

begins to expand to prevent dam-

age or slipping.

F01I0BZ

2

1

3

1. PTO flywheel

2. Grease fitting

3. PTO flywheel boot

Reinstall and secure PTO flywheel

guard.

Anticorrosion Protection

Throttle/Choke Cables

Lubricate the throttle and choke

cables (if so equipped) with BOM-

BARDIER LUBE lubricant or equiva-

lent.

Electrical Connections

As necessary, apply anticorrosion

product such as dielectric grease on

battery posts and all exposed c

able

connectors.

CAUTION:

Do not lubricate con-

nectors of the Multi-Purpos

eElec-

tronic Module.

Additional Lubrication

BOMBARDIER LUBE lubri

cant or

equivalent will help prevent corrosion

of metallic parts and maintain proper

operation of moving

mechanisms.

_____________________

75

www.SeaDooManuals.net

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 120 121

Kommentare zu diesen Handbüchern

Keine Kommentare