SeaDoo GTI LE RFI Bedienungsanleitung PDF herunterladen (Seite 12)

F15E02A

Model(s): 787 RFI Engines

Disconnect hose [

[[

[2]

]]

] just above T-fitting [

[[

[1]

]]

]

as shown.

F15E03A

Install a hose pincher [

[[

[1]

]]

] just below T-fitting.

Pour approximately 300 mL (10 oz) of antifreeze in

the water regulator valve supply hose to allow

antifreeze flowing through the valve and into

muffler to protect them.

Reconnect hose to T-fitting and remove hose

pincher (if applicable).

Model(s): All GTI's

Remove temporary hose on 717 engines and

reconnect engine water outlet hose.

Remove hose pinchers.

Most of the antifreeze will drain out when removing

thehosepinchers. Useacontainertorecoverit.

DISPOSE ANTIFREEZE AS PER YOUR LOCAL

LAWS AND REGULATIONS.

: Although antifreeze will mainly drain out,

the antifreeze has mixed with the water that was

possibly trapped in the water jackets and thus

preventing freezing problems.

At preseason preparation, drain the remaining

antifreeze from cooling system prior to using

the watercraft. Ensure no hose pinchers were

forgotten at storage.

12 / 20 2004-19 Service

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

SeaDoo GTI LE RFI Bedienungsanleitung Seite 12