SeaDoo 2007 4-TEC Series Spezifikationen PDF herunterladen (Seite 117)

Intercooler and Exhaust

Manifold

The exhaust system is self draining,

but the intercooler and exhaust man-

ifold need the following protection.

Intercooler (if so equipped)

smr2006-012-002_b

TYPICAL

1. Intercooler

2. Exhaust manifold

3. Intercooler outlet hose

4. Engine oil filling cap

Remove both intercooler hoses.

NOTE: Some clamps are removable

and reusable; others must be cut and

replaced.

lmo2007-002-008_a

TYPICAL

1. Intercooler

2. Inlet hose clamp (reusable)

3. Outlet hose clamp (replace)

Let the intercooler drain, then recon-

nect the bottom hose.

By using a funnel and a small hose,

pour approximately 200 mL (6.76 oz

U.S.) of antifreeze into the intercooler

through the outlet nipple.

F19D0DA

TYPICAL

1. Intercooler

2. Outlet nipple

3. Inlet nipple

Reconnect the intercooler top hose

and secure with a new clamp.

Exhaust Manifold

Disconnect the manifold top water

outlet hose from the exhaust pipe.

F18D0IB

TYPICAL

1. Exhaust manifold

2. Exhaust pipe

3. Water outlet hose clamp (reusable)

Install a funnel at the end of water

outlet hose, then pour approximately

300 mL (10.14 oz U.S.) of antifreeze

into the exhaust manifold.

_____________________

115

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 147 148

Kommentare zu diesen Handbüchern

Keine Kommentare

SeaDoo 2007 4-TEC Series Spezifikationen Seite 117

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor SeaDoo 2007 4-TEC Series