SeaDoo GSI Betriebsanleitung Seite 70

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 105
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 69
68
Towing the Watercraft in
Water
Special precautions should be taken
when towing a Sea-Doo watercraft in
water.
Maximum recommended towing
speed is 24 km/h (15 MPH).
When towing your watercraft in wa-
ter, pinch the water supply hose
from the impeller housing to the en-
gine with the Hose Pincher (large)
P/N 529 030 400 shown in the fol-
lowing illustration.
This will prevent the cooling system
from filling which may lead to water
being injected into and filling the ex-
haust system. Without the engine run-
ning there isn’t any exhaust pressure
to carry the water out the exhaust out-
let.
Snugly install the hose pincher on the
hose as shown in the following photo.
TYPICAL
1. Hose pincher installed
Low-Charge Battery
Condition
See your dealer to have it charged or
replaced.
-
CAUTION
Failure to do this may result in
damage to the engine. If you
must tow a stranded watercraft in
water and do not have a hose
pincher be sure to stay well be-
low the maximum towing speed
of 24 km/h (15 MPH).
F01B23Y
-
CAUTION
When finished towing the craft,
hose pincher must be removed
before operating. Failure to do so
will result in damage to the en-
gine.
WARNING
Do not charge or boost the bat-
tery while installed on the water-
craft.
F01E1XY
1
smo9701a.bk : smo9701b.fm5 Page 68 Monday, November 3, 1997 9:54 AM
www.SeaDooManuals.net
Seitenansicht 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 104 105

Kommentare zu diesen Handbüchern

Keine Kommentare