SeaDoo GS Betriebsanleitung Seite 68

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 100
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 67
66
Fuses
If an electrical problem occurs, check
the fuses. If a fuse is burnt, replace by
one of the same rating. Follow proce-
dures below.
CAUTION: Do not use a higher rated
fuse as this can cause severe dam-
age. If a fuse is regularly burnt, refer
to an authorized Sea-Doo dealer.
GTS Models
Fuses are located in the electrical box,
mounted on the MPEM.
To access fuses, unclip and move
away electrical box from its seat.
Open the electrical box.
Remove fuse caps.
1. Fuse caps
2. Spare fuse holder
3. MPEM
Check fuse condition.
Make sure to properly close the fuse
cap.
Properly close the electrical box cover
making sure its seal is well positioned.
RFI Models
To access fuses on the Multi-Purpose
Electronic Module, open front storage
compartment cover and remove bas-
ket.
Locate MPEM on the left side of wa-
tercraft.
Unclip the fuse cover from the MPEM.
TYPICAL
1. MPEM
2. Fuse cover
Use the tabs of the fuse cover to re-
move and reinstall fuses.
1. Fuse cover
2. Fuse tabs
NOTE: There are 3 spare fuses on the
MPEM.
To access the fuses in the rear electri-
cal box, remove seats.
Remove basket.
F01H5IY
123
F06H1SY
1
2
F06H1TY
12
smo2001-002a.book Page 66 Wednesday, June 7, 2000 3:57 PM
www.SeaDooManuals.net
Seitenansicht 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare